Electronic Lock

The Kay Medical Storage Cabinet consists of a separate upper and lower section. The upper section comes standard with three adjustable glass shelves and a glass door, and the lower section comes standard with a stainless steel exterior and one stainless steel removable shelf.

Dimensions: 30" x 58" x 16"

The Kennedy Medical Storage Cabinet consists of a separate upper and lower section. The upper section comes standard with three glass shelves, a narcotic locker, and glass doors, and the lower section consists of three drawers and one compartment with a stainless steel exterior and one stainless steel removable shelf.

Dimensions: 36" x 76-1/2" x 16"

The Walter Medical Storage Cabinet is 79-1/4” tall on gliders and 16” deep. It is great for storing endoscopy equipment or other large instruments on its pegboard. View its contents through its two glass doors.

The Paul Medical Storage Cabinet is 79-1/4” tall on casters and 16” deep and includes five glass shelves adjustable every half inch. This cabinet provides maximum shelving storage for instruments and supplies. View its contents through its two glass doors.

This built-in medical storage console cabinet is great for storing endoscopy equipment or other large instruments on its pegboard. View its contents through its two glass doors with the glass door variation.

This built-in stainless steel medical supply cabinet provides shelving storage for instruments and supplies. View its contents through its glass or stainless steel door.

These stainless steel, single door high cabinets are designed as an individual unit or to fit within a framework of cabinets. They are constructed as floor and wall supported individual cases with finished sides and requires wall anchoring to be secure. They contain five adjustable stainless steel shelves. Choose for the door to be either glass or stainless steel.

These stainless steel, double door high cabinets are designed as an individual unit or to fit within a framework of cabinets. They are constructed as floor and wall supported individual cases with finished sides and requires wall anchoring to be secure. They contain five adjustable stainless steel shelves. Choose between glass or stainless steel swinging doors and glass or stainless steel sliding doors.

These 13”-deep stainless steel wall cabinets are designed as an individual unit with finished sides or to fit within a framework of cabinets. They are constructed to fit flush against wall surfaces with a recessed back panel for uneven walls and require wall anchoring to be secure. Choose between a glass or stainless steel door.

These 13”-deep stainless steel wall cabinets are designed as individual units with finished sides or to fit within a framework of cabinets. They are constructed to fit flush against wall surfaces with a recessed back panel for uneven walls and require wall anchoring to be secure. Choose between glass or stainless steel swinging doors and glass or stainless steel sliding doors.

These single-width stainless steel base cabinets are designed as an individual unit with finished sides or to fit within a framework of cabinets and require wall anchoring to be secure. They come in four different configurations. Configurations with compartments come standard with one removable stainless steel shelf inside.

These double width, stainless steel base cabinets are designed as an individual unit with finished sides or to fit within a framework of cabinets. They are constructed to fit flush against wall surfaces with a recessed back panel for uneven walls and require wall anchoring to be secure. They come in six different configurations. Configurations with compartments come standard with one removable stainless steel shelf inside.

Sinks and countertops must be ordered separately and are installed in the field. They require wall anchoring to be secure.

All countertops are fabricated from one piece, fully-welded, 16-gauge, 304 Stainless Steel. They extend 1” beyond the front, right, and left sides of base cabinet dimensions. Unless otherwise specified, they come with a marine edge to help protect against liquid slippage. Back-splashes and end-splashes (4” height) are optional to protect wall surfaces.

All sink bowls can fit under base cabinets without drawers, but we suggest using models AC and DB for moisture ventilation.