8881SS-1F - Wall mounted scrub sink, (1) place, infra-red sensor faucet, 32"W x 27-1/2"D x 37-1/8"H

MATERIALS: Stainless Steel, Type 300 Series, nickel-bearing.

GAUGES: Bowls - Windsor Models - 14 gauge, 8000 Series - 14 gauge. Windsor-Brackets and hangers - 11 gauge. Aprons - 16 gauge, Base-8000 Series - 16 gauge. Mounting Brackets - 8000 Series - 12 gauge, "Z" bracket -14 gauge.

CONTRUCTION: Windsor Models - Sinks are built with seamless construction, plus 3/4" (1.905) coved corners. A continuous rolled rim of 1-1/2" (3.81) diameter is provided at the front and sides, with sides welded to the backsplash, which extends 8" (20.32) above the rimm and returns, 2-1/2" (6.35) at the top and ends. Bowls are 8" (20.32) deep and pitched to a 1-1/2" (3.81) stainless steel waste outlet and tailpiece in the center. Flag brackets at the sides, under the rolled rims, and a "Z" shaped hanger, under the top rear of the backsplash, are furnished for installation. Sinks provide scrub areas approximately 22" (55>88) wide, each with its own gooseneck outlet. 8000 Series: Sinks are built with seamless construction with 1" (2.54) coved corners. Bowls are 9-1/4" (23.495) deep at rim and 18-1/2" (46.99) from spout to drain allowing for a deep scrub area. The spout is positioned toward the rear of the sink to divert water splash away from the operator. Undersides of the bowl are sound deadened and enclosed by double walled end panels. Each sink is equipped with a stainless steel base that will house either an infrared sensor or knee panels for manual operation. Base extends 21" (53.34) from the basin and hangs 14-1/2" (36.83) from finished floor. 2" bracket along with chair carrier supplied with unit. Refer to installation manual. Sinks provide scrub areas approximately 30" (76.20" wide x 21-1/2" (54.61) deep, each with its own swivel gooseneck faucet; sterilized spray rose aerator, adjustable thermostatic mixing valve, check stop strainer, static sensing probe, flow control valve, 1-1/2" (3.81) stainless steelw waste outlet and tailpiece.

WELDING: All welding is accomplished by heli-arc method. All exposed welds ground smooth.

FINISH: All exposed stainless steel surfaces are free from pit marks, weld seams and scale, and polished to a No. 4 satin finish.